Standard lengths
For the standard lengths, see the figures below.
The standard order is from the root of the plug blade to the end of the connector (Figure-1).
For an L-shaped plug or connector, the standard order is as shown in (Figure-2).
Of the one-ended plugs, the straight type is (Figure-1) and the L-shaped type is (Figure-2).
(Figure-1)Straight type
(Figure-2)L-shaped type
Figure 1 Standard tolerance
| （M） | Tolerance（mm） |
|---|---|
| L ＜ 1 | +50 , -0 |
| 1 ≤ L ＜ 4 | +100 , -0 |
| 4 ≤ L ＜ 7 | +200 , -0 |
Figure 2 Standard tolerance
| （M） | Tolerance（mm） |
|---|---|
| L ＜ 1 | ± 25 |
| 1 ≤ L ＜ 4 | ± 50 |
| 4 ≤ L ＜ 7 | ± 100 |
The standard length of the power cord starts at 0.5 M and increments in steps of 0.5 M.
For a power cord whose total length exceeds 5 M, consult with us.
■ Standard ground wire length
